Tag Archives: Dining Renovation

Woody the Woodchuck

10 Jun

Turns out, when you remove a wall there is some patching to do on the flip side of the coin. Wall patching, floor patching, yep and yep. A la this little beaut. There is definitely a hole there ūüėČ With a matching gap on the other side. Twinsies.

How to patch wood floor

Patching Wood Floor

When we went shopping for the mudding materials, we came back with a few extra essentials. While we were shopping, I saw Jay start to slowly ebb toward the power tools section (never good). We were in the market for an air compressor and nail gun, and although I was *hoping* to find one on craigslist, we landed up getting a shiny new one instead.

Why you ask, well, because there was a crazy-licous Memorial Day sale where the nail gun compressor kit was marked down $100, meaning only $150 green backs had to be exchanged for this new power house. Overall, for the use we are going to get out of this beast, I’ll call that a good use of our simolions. So, Jay got his new tool, and in turn, I got Jay to do some projects around here the man had been dragging his feet on. All in the name of getting a new power tool – man – he knows how to manipulate ūüėČ

Bostitch Air Compressor and Nail Gun

Bostitch Air Compressor

So, power tool in hand, we set off to remedy our little gap of a problem. We needed more wood to patch this baby up. Not a lot of wood, but turns out it’s hard to find little batches of red oak. We probably needed 4 square feet of wood, but we had to buy it in a 20sq foot bundle. Bummer. The good news, we now know we have ample wood in case things go screwy along the way. The bad, the wood came in over budget. In all honesty I’m kind of at the point where I’m sad if things go over budget, but I am also reaching my delirium point with this whole reno, where I just let Jay add things to the shopping cart, so we can just get the project done. I want my kitchen back, I want a dining room to eat dinner at, I want to not have an inch of dust covering my floor when I get up each morning. So $60 vs $20 right now, grumble grumble, whatever.

How to patch wood floor

Red Oak Floor

Speaking of just throwing things into the shopping cart, look at Jay’s handy new set of chisels. I think Jay’s long lost calling is as a sculptor. Grab this man a beret cause he pretty much thought he was Michelangelo. Sans naked sculpted people. And just run with the beret reference, I know, these fancy hats are probably before¬†his time but I think artist and I think beret. Roll with it.

Kobalt Wood Chisel Set

Wood Chisel

I kept walking into the room with Jay all focused on his new art form and listening to my husband say things like – this is so relaxing, I love chiseling wood, can we do more of these projects. I could here the angels singing. Music to my ears, grasshopper.

The first step in this covert little operation was to measure where we wanted the wood piece to end at. ¬†We used our level to make sure that the line was as straight as a whistle. No crooked boards here. Also, another little tip. We tried to stagger each board we cut, so that all the wood didn’t end at the same spot. We wanted the new pieces to look as intentional (and original) as possible, so changing end location helped to achieve this.

How to patch wood floor

Measuring Wood

The next step, well this one freaked me out a little. I knew that the pieces of wood had to come up, but still, taking a screw driver to my wood floor was not my vision of progress. More like mutilation. But, it had to be done, so Jay proceeded as I watched and waited on baited breath. You want to screw 2-3 holes right along the line where you plan to have your piece of wood end. Drilling the holes helps to prevent the wood from splitting as you lift up the board, and defines a clear ending point.

How to patch wood floors

Screwing Hole

Once you’ve added 2-3 holes in the wood, you can start to pry up each piece a bit with a crowbar and rubber mallet. If you put in a sufficient amount of holes, you should find that this keeps the wood from splitting beyond your intended end point. We found that some pieces were harder to remove than others, largely due to extra glue being placed on them, making them stick too much to an adjacent board. We tried to be very careful when prying each board up, since we knew that any screw ups could mean taking out a whole other board.

How to patch wood floor

Removing Wood

Once you get the big pieces up, you have enough left at your end to start chiseling, which is what creates the nice, crisp edge, and makes it look like a newly laid piece. In general, Jay would start by tapping along each line (that he drew with his pencil) and then he would come back through and remove each chunk of wood, one layer at a time. Since it is so important that this edge looks perfectly straight, this took about 25 minutes for each piece of wood that was modified. Luckily, Jay seemed to be enjoying this part of the process for the most part, so that always helps make the minutes pass a bit quicker.

How to replace wood floor

Chiseling

After each piece had been chiseled to our hearts content, the wood looked like the photo below. We tried to maintain the staggered look with each piece of wood. See those laser sharp edges? Jay is such a rockstar.

How to replace wood boards on floor

Replacing Wood Floor